Friday, July 31, 2009

Introducing the Cabinet Vac by interVac

From the folks that brought you the GarageVac has now released a central vacuum system that is both easy to install and portable. Meaning you can move it to different areas of your home or place it in an RV or Boat to save space that normally would be taken up by an upright or canister vacuum. Can be easily installed with or without pipe fittings. By centrally locating the vacuum unit, one interVac vacuum along with the accessory kit can clean a 1200 square foot area with ease. Need to clean more space? They have you covered, by simply adding additional vacuum units you can increase the square footage, so every inch of the surroundings are dirt and allergen free. The accessory kit comes with a stretch hose that reaches a maximum of 40 feet and shrinks down to 8 feet for easy storage. The vacuums feature a 400 airwatt motor with 100 waterlift, 120 volts, 12 amps. It's made of durable Polycarbonate/ABS that will not rust or break and uses a high efficiency Micron Triple-Filtration Process with a dust bag to catch all your dirt.

There are 3 models to choose from. The easiest being the Model H, which is a surface mounted unit with a built-in inlet valve located on front of the unit. The "H" means it is designed to hang on the surface of a wall using four screws or Velcro. The vacuum has a six foot electric cord attach so no special electrical hook-up is required. This model can easily be removed and remounted in other locations with extreme ease.

The next model is the Model F. The "F" mean it is designed to be mounted flush (recessed) into a 2x4 interior wall, a cabinet or any other stable surface. The unit does not have a electric cord and must be hard-wired for a proper electrical connection. It's fairly easy to install. All you have to do is drill out the four corner indentations, and by following the template provided for you with the unit, make a cut out for the unit into the wall. Wire it up to a near-by electrical outlet or circuit breaker and secure the vacuum with four screws. It's that simple.

The last model they released is similar to a traditional central vacuum system. This model is called Model RM & RMG. A vacuum inlet is installed in a convenient place in your home, like your living room and the unit is mounted on the other side of the wall or further away. A 2inch flexible hose connects the valve with the unit. Ideally it's best for condos, town homes, engine room in a yacht or in an office setting. One power unit can take care of an area between 900 and 1400 sqft. This model is broken up into 2 sub-models. The RM is supplied with an electric cord for an easy power connection. The RMG is to be hard-wired into an electrical outlet or to your circuit breaker. Other than that, the units are the same.

We just started selling these and those who've already purchased them have called us back to let us know how well they work and how extremely easy it was to install in their home or RV. They come in 3 colors: Beige, White, and Black. And start at $289.95 for the unit and a deluxe attachment kits. The kit comes with the stretch hose, an adjustable non-corrosive one-piece telescoping wand, a floor/rug tool, dusting brush, upholstery tool, crevice tool and a mesh storage bag to keep all these things in a nice neat place.

For more info on the interVac central vacuum or to purchase one of these systems, give us a call at 1.800.322.2965 or visit ThinkVacuums.com